Diving Air Filtration & Charging Panel (manual)

Part Number (s): NA53782
Weight: 49 kg
Product Code: 
NA53782
Manual diving air charging panel. Inlet connection. Inlet isolation stop valve. Inlet pressure gauge. Inlet pressure gauge stop & release valve. Two-stage filtration consisting of coalescing element pre-filter and a composit cartridge element adsorption stage. Spring loaded pressure regulator. Outlet pressure gauge. Outlet pressure gauge stop & release valve. Three outlet isolation stop valves. Three outlet connections. Three outlet pressure hoses. Mild steel painted back panel. Bulkhead mounting holes provided.
Features: 
Manual diving air charging panel. Inlet connection. Inlet isolation stop valve. Inlet pressure gauge. Inlet pressure gauge stop & release valve. Two-stage filtration consisting of coalescing element pre-filter and a composit cartridge element adsorption stage. Spring loaded pressure regulator. Outlet pressure gauge. Outlet pressure gauge stop & release valve. Three outlet isolation stop valves. Three outlet connections. Three outlet pressure hoses. Mild steel painted back panel. Bulkhead mounting holes provided.
Benefits: 
Supply of manually regulated diving air at pressures between 200 bar (2,900 psi) and 100 bar (1,450 psi). Filtration removes hydrocarbons, oil & water. Three outlets means one to three cylinders may be charged at the same time. Robust design. Bulkhead mounting.

Specification

Inlet Connection: 
1/4" BSP(M)
Outlet Connection: 
1/4" BSP(M)
Maximum Working Pressure - bar : 
276
Maximum Working Pressure - psig: 
4000
Outlet Pressure Range - bar: 
200 - 100
Outlet Pressure Range - psi: 
2,900 - 1,450
Stage One Pressure Range - bar - fluid: 
0 - 276
Stage One Pressure Range - psi - fluid: 
0 - 4,000
Inlet/Outlet Pressure variation (%): 
5
Medium: 
Air

Options

Panel Mounting: 
Yes
Standard Materials: 
Charging Panel: Mild steel epoxy painted. Valves: Nickel Aluminium bronze with stainless steel internals. Hoses: Nitrile rubber with stainless steel swages and lanyards fitted. Pipe-work: stainless steel. Filtration: Aluminium housings with dessicant filtration in renewable cartridges.
Ordering Information: 
Applications - by charging pressure and quantity. Maximum inlet pressure. Minimum inlet pressure. Operation temperature range. Details of compressor. Details of air storage capacity. Certification & QA requirements.
Certification
Certification: 
Classification Society e.g. LRS, GL, BV, et al
Installation Dimensions
Height (mm): 
883
Depth (mm): 
222
Width (mm): 
615
Length between ports (mm): 
555
Height of port from base (mm): 
55
Packaging Dimensions
Packaging Height (mm): 
tba
Packaging Width (mm): 
tba
Packaging Depth (mm): 
tba
Ordering
Spares kit number: 
tba