CNG Fuelling Stations

Priority Fill ManifoldHale Hamilton's valve manifolds provide compact, integrated and highly competitive solutions for Priority Fill, Compressor and Dispenser systems. The valve technology used caters for most system control methods with both fully mechanical and actuated valve systems available. Our range of Priority Fill and Dispenser Manifolds offer our customers an attractive value proportion compared with the common 'Priority Panel'. In the past three years, Hale Hamilton has supplied more than 1500 Priority Fill Manifolds, proof of our place as market leader in Priority Fill.

3 Line, Single Hose Ball Valve Dispenser Manifold with Integrated Relief Valves but without Filters

Product Code: 
tba
The Ball Valve Dispenser Manifold is an integrated valve solution for CNG dispensers incorporating all valve and instrumentation required by the dispenser. The manifold provides a cost effective alternative to piping individual components together and is a more compact solution.
Features: 
Fully mechanical multifunction dispenser manifold block with Actuated Ball Valves, instrumentation ports (Gauges, vent), two integrated relief valves, one hose connection, three inlet connections.
Benefits: 
Excellent Contamination Tolerance - (the ball valves tend to wipe themselves clean of small particles of contamination), Reduction Labour, Material and Procurement costs through buying an integrated product, Fewer connections, Fewer leak paths, Compact Solution,

Specification

Inlet Connection: 
1/2" NPT(F)
Outlet Connection: 
1/2" NPT(F)
Outlet Pressure Range - bar: 
345
Outlet Pressure Range - psi: 
5000
Actuator Pilot Pressure: 
8
Nominal bore - mm: 
10
Flow Factor/ Cv: 
?
Medium: 
Compressed Natural Gas (CNG)
Standard Materials: 
Manifold and Actuator: Aluminium Alloy, Ball Valve Components: Stainless Steel, Elastomeric Seals: Viton, Valves Seats: Delrin
Ordering Information: 
No of lines, Single or Dual Hose, Set pressure for relief valves (if applicable), Flow rate required, Pressure Rating required, Temperature Range Required.
Certification
Certification: 
Certification of conformance to PED category 'x', ATEX category 3.
Service instruction reference: 
tba

3 Line Mechanical Priority Fill Manifold

Product Code: 
SA959
CNG Priority Fill Manifolds direct high pressure compressed natural gas from a compressor or tube trailer to a number of storage banks while retaining the residual pressures in each bank. Gas is then drawn from the storage banks through the Priority Fill Manifold to the dispenser(s) on the fuelling station forecourt. Our tried and tested designs are incorporated into a compact range of manifolds which offer significant improvements in terms of installation, footprint and minimisation of potential leak paths, compared with traditional panels using discrete components.
Features: 
Fully mechanical multifunction manifold block including, Direct Fill, Connections to compressor, storage and dispenser lines, Priority Valve, Check valves, Storage Gauges
Benefits: 
Accurate and Fully Automatic control of residual pressure in storage cascade banks, Consistent lift and reseat from the Priority valves makes for a more efficient priority fill system, proven reliability of all components in the manifold reduces maintenance, Easy change out of all components which are either cartridge valves and externally screwed into the manifold, easier and cheaper to install thanks to the through manifold mounting feature.

Specification

Process Connection(s): 
3/4" NPT
Outlet Pressure Range - bar: 
400
Outlet Pressure Range - psi: 
5800
Priority Valve Set pressure range bar: 
170 - 250bar
Priority Valve Set pressure range psi: 
2465 to 3600
Nominal bore - mm: 
12
Medium: 
Compressed Natural Gas
Standard Materials: 
Anodised aluminium, Nitrile , Viton & PEEK.
Ordering Information: 
Priority Valve Set pressures. Number of lines. Certification and QA requirements. What optional features are required.
Service instruction reference: 
PDF
Installation Dimensions
Height (mm): 
338
Depth (mm): 
145
Width (mm): 
344

3 Line Mechanical Priority Fill Manifold

Product Code: 
SA959
CNG Priority Fill Manifolds direct high pressure compressed natural gas from a compressor or tube trailer to a number of storage banks while retaining the residual pressures in each bank. Gas is then drawn from the storage banks through the Priority Fill Manifold to the dispenser(s) on the fuelling station forecourt. Our tried and tested designs are incorporated into a compact range of manifolds which offer significant improvements in terms of installation, footprint and minimisation of potential leak paths, compared with traditional panels using discrete components.
Features: 
Fully mechanical multifunction manifold block including, Direct Fill, Connections to compressor, storage and dispenser lines, Priority Valve, Check valves, Storage Gauges, Dispenser Line and Compressor Inlet Manual Ball Valves, ESD valves and a Low Bank Check Valve
Benefits: 
Accurate and Fully Automatic control of residual pressure in storage cascade banks, Consistent lift and reseat from the Priority valves makes for a more efficient priority fill system, proven reliability of all components in the manifold reduces maintenance, Easy change out of all components which are either cartridge valves and externally screwed into the manifold, easier and cheaper to install thanks to the through manifold mounting feature.

Specification

Process Connection(s): 
3/4" NPT
Outlet Pressure Range - bar: 
400
Outlet Pressure Range - psi: 
5800
Priority Valve Set pressure range bar: 
170 - 250bar
Priority Valve Set pressure range psi: 
2465 to 3600
Nominal bore - mm: 
12
Medium: 
Compressed Natural Gas
Standard Materials: 
Anodised aluminium, Nitrile , Viton & PEEK.
Ordering Information: 
Priority Valve Set pressures. Number of lines. Certification and QA requirements. What optional features are required.
Service instruction reference: 
PDF
Installation Dimensions
Height (mm): 
490
Depth (mm): 
145
Width (mm): 
244

3 Line Mechanical Priority Fill Manifold

Product Code: 
SA959
CNG Priority Fill Manifolds direct high pressure compressed natural gas from a compressor or tube trailer to a number of storage banks while retaining the residual pressures in each bank. Gas is then drawn from the storage banks through the Priority Fill Manifold to the dispenser(s) on the fuelling station forecourt. Our tried and tested designs are incorporated into a compact range of manifolds which offer significant improvements in terms of installation, footprint and minimisation of potential leak paths, compared with traditional panels using discrete components.
Features: 
Fully mechanical multifunction manifold block including, Direct Fill, Connections to compressor, storage and dispenser lines, Priority Valve, Check valves, Storage Gauges, Dispenser Line and Compressor Inlet Manual Ball Valves and ESD valves
Benefits: 
Accurate and Fully Automatic control of residual pressure in storage cascade banks, Consistent lift and reseat from the Priority valves makes for a more efficient priority fill system, proven reliability of all components in the manifold reduces maintenance, Easy change out of all components which are either cartridge valves and externally screwed into the manifold, easier and cheaper to install thanks to the through manifold mounting feature.

Specification

Process Connection(s): 
3/4" NPT
Outlet Pressure Range - bar: 
400
Outlet Pressure Range - psi: 
5800
Priority Valve Set pressure range bar: 
170 - 250bar
Priority Valve Set pressure range psi: 
2465 to 3600
Nominal bore - mm: 
12
Medium: 
Compressed Natural Gas
Standard Materials: 
Anodised aluminium, Nitrile , Viton & PEEK.
Ordering Information: 
Priority Valve Set pressures. Number of lines. Certification and QA requirements. What optional features are required.
Service instruction reference: 
PDF
Installation Dimensions
Height (mm): 
490
Depth (mm): 
145
Width (mm): 
344

3 Line Mechanical Priority Fill Manifold

Product Code: 
SA959
CNG Priority Fill Manifolds direct high pressure compressed natural gas from a compressor or tube trailer to a number of storage banks while retaining the residual pressures in each bank. Gas is then drawn from the storage banks through the Priority Fill Manifold to the dispenser(s) on the fuelling station forecourt. Our tried and tested designs are incorporated into a compact range of manifolds which offer significant improvements in terms of installation, footprint and minimisation of potential leak paths, compared with traditional panels using discrete components.
Features: 
Fully mechanical multifunction manifold block including, Direct Fill, Connections to compressor, storage and dispenser lines, Priority Valve, Check valves, with Storage Gauges, Dispenser Line and Compressor Inlet Manual Ball Valves, ESD valves, Compressor Supply Pressure Gauge and a Low Bank Check Valve
Benefits: 
Accurate and Fully Automatic control of residual pressure in storage cascade banks, Consistent lift and reseat from the Priority valves makes for a more efficient priority fill system, proven reliability of all components in the manifold reduces maintenance, Easy change out of all components which are either cartridge valves and externally screwed into the manifold, easier and cheaper to install thanks to the through manifold mounting feature.

Specification

Process Connection(s): 
3/4" NPT
Outlet Pressure Range - bar: 
400
Outlet Pressure Range - psi: 
5800
Priority Valve Set pressure range bar: 
170 - 250bar
Priority Valve Set pressure range psi: 
2465 to 3600
Nominal bore - mm: 
12
Medium: 
Compressed Natural Gas
Standard Materials: 
Anodised aluminium, Nitrile , Viton & PEEK.
Ordering Information: 
Priority Valve Set pressures. Number of lines. Certification and QA requirements. What optional features are required.
Service instruction reference: 
PDF
Installation Dimensions
Height (mm): 
490
Depth (mm): 
145
Width (mm): 
244

3 Line Mechanical Priority Fill Manifold

Product Code: 
SA959
CNG Priority Fill Manifolds direct high pressure compressed natural gas from a compressor or tube trailer to a number of storage banks while retaining the residual pressures in each bank. Gas is then drawn from the storage banks through the Priority Fill Manifold to the dispenser(s) on the fuelling station forecourt. Our tried and tested designs are incorporated into a compact range of manifolds which offer significant improvements in terms of installation, footprint and minimisation of potential leak paths, compared with traditional panels using discrete components.
Features: 
Fully mechanical multifunction manifold block including, Direct Fill, Connections to compressor, storage and dispenser lines, Priority Valve, Check valves, Storage Gauges and Dispenser Line and Compressor Inlet Manual Ball Valves
Benefits: 
Accurate and Fully Automatic control of residual pressure in storage cascade banks, Consistent lift and reseat from the Priority valves makes for a more efficient priority fill system, proven reliability of all components in the manifold reduces maintenance, Easy change out of all components which are either cartridge valves and externally screwed into the manifold, easier and cheaper to install thanks to the through manifold mounting feature.

Specification

Process Connection(s): 
3/4" NPT
Outlet Pressure Range - bar: 
400
Outlet Pressure Range - psi: 
5800
Priority Valve Set pressure range bar: 
170 - 250bar
Priority Valve Set pressure range psi: 
2465 to 3600
Nominal bore - mm: 
12
Medium: 
Compressed Natural Gas
Standard Materials: 
Anodised aluminium, Nitrile , Viton & PEEK.
Ordering Information: 
Priority Valve Set pressures. Number of lines. Certification and QA requirements. What optional features are required.
Service instruction reference: 
PDF
Installation Dimensions
Height (mm): 
338
Depth (mm): 
145
Width (mm): 
344

3 Line Mechanical Priority Fill Manifold

Product Code: 
SA959
CNG Priority Fill Manifolds direct high pressure compressed natural gas from a compressor or tube trailer to a number of storage banks while retaining the residual pressures in each bank. Gas is then drawn from the storage banks through the Priority Fill Manifold to the dispenser(s) on the fuelling station forecourt. Our tried and tested designs are incorporated into a compact range of manifolds which offer significant improvements in terms of installation, footprint and minimisation of potential leak paths, compared with traditional panels using discrete components.
Features: 
Fully mechanical multifunction manifold block including, Direct Fill, Connections to compressor, storage and dispenser lines, Priority Valve, Check valves,
Benefits: 
Accurate and Fully Automatic control of residual pressure in storage cascade banks, Consistent lift and reseat from the Priority valves makes for a more efficient priority fill system, proven reliability of all components in the manifold reduces maintenance, Easy change out of all components which are either cartridge valves and externally screwed into the manifold, easier and cheaper to install thanks to the through manifold mounting feature.

Specification

Process Connection(s): 
3/4" NPT
Outlet Pressure Range - bar: 
400
Outlet Pressure Range - psi: 
5800
Priority Valve Set pressure range bar: 
170 - 250bar
Priority Valve Set pressure range psi: 
2465 to 3600
Nominal bore - mm: 
12
Medium: 
Compressed Natural Gas
Standard Materials: 
Anodised aluminium, Nitrile , Viton & PEEK.
Ordering Information: 
Priority Valve Set pressures. Number of lines. Certification and QA requirements. What optional features are required.
Service instruction reference: 
PDF
Installation Dimensions
Height (mm): 
338
Depth (mm): 
145
Width (mm): 
344

3 Line Mechanical Priority Fill Manifold

Product Code: 
SA959
CNG Priority Fill Manifolds direct high pressure compressed natural gas from a compressor or tube trailer to a number of storage banks while retaining the residual pressures in each bank. Gas is then drawn from the storage banks through the Priority Fill Manifold to the dispenser(s) on the fuelling station forecourt. Our tried and tested designs are incorporated into a compact range of manifolds which offer significant improvements in terms of installation, footprint and minimisation of potential leak paths, compared with traditional panels using discrete components.
Features: 
Fully mechanical multifunction manifold block including, Direct Fill, Connections to compressor, storage and dispenser lines, Priority Valve, Check valves, Storage Gauges, Dispenser Line and Compressor Inlet Manual Ball Valves and Low Bank Check Valves
Benefits: 
Accurate and Fully Automatic control of residual pressure in storage cascade banks, Consistent lift and reseat from the Priority valves makes for a more efficient priority fill system, proven reliability of all components in the manifold reduces maintenance, Easy change out of all components which are either cartridge valves and externally screwed into the manifold, easier and cheaper to install thanks to the through manifold mounting feature.

Specification

Process Connection(s): 
3/4" NPT
Outlet Pressure Range - bar: 
400
Outlet Pressure Range - psi: 
5800
Priority Valve Set pressure range bar: 
170 - 250bar
Priority Valve Set pressure range psi: 
2465 to 3600
Nominal bore - mm: 
12
Medium: 
Compressed Natural Gas
Standard Materials: 
Anodised aluminium, Nitrile , Viton & PEEK.
Ordering Information: 
Priority Valve Set pressures. Number of lines. Certification and QA requirements. What optional features are required.
Service instruction reference: 
PDF
Installation Dimensions
Height (mm): 
338
Depth (mm): 
145
Width (mm): 
344

3 Line Mechanical Priority Fill Manifold

Product Code: 
SA899
CNG Priority Fill Manifolds direct high pressure compressed natural gas from a compressor or tube trailer to a number of storage banks while retaining the residual pressures in each bank. Gas is then drawn from the storage banks through the Priority Fill Manifold to the dispenser(s) on the fuelling station forecourt. Our tried and tested designs are incorporated into a compact range of manifolds which offer significant improvements in terms of installation, footprint and minimisation of potential leak paths, compared with traditional panels using discrete components.
Features: 
Fully mechanical multifunction manifold block including, Direct Fill, Connections to compressor, storage and dispenser lines, Priority Valve, Check valves, Storage Gauges
Benefits: 
Accurate and Fully Automatic control of residual pressure in storage cascade banks, Consistent lift and reseat from the Priority valves makes for a more efficient priority fill system, proven reliability of all components in the manifold reduces maintenance, Easy change out of all components which are either cartridge valves and externally screwed into the manifold, easier and cheaper to install thanks to the through manifold mounting feature.

Specification

Process Connection(s): 
1/2" NPT
Outlet Pressure Range - bar: 
400
Outlet Pressure Range - psi: 
5800
Priority Valve Set pressure range bar: 
170 - 250bar
Priority Valve Set pressure range psi: 
2465 to 3600
Nominal bore - mm: 
12
Medium: 
Compressed Natural Gas
Standard Materials: 
Anodised aluminium, Nitrile , Viton & PEEK.
Ordering Information: 
Priority Valve Set pressures. Number of lines. Certification and QA requirements. What optional features are required.
Service instruction reference: 
PDF
Installation Dimensions
Height (mm): 
338
Depth (mm): 
145
Width (mm): 
344

3 Line Mechanical Priority Fill Manifold

Product Code: 
SA899
CNG Priority Fill Manifolds direct high pressure compressed natural gas from a compressor or tube trailer to a number of storage banks while retaining the residual pressures in each bank. Gas is then drawn from the storage banks through the Priority Fill Manifold to the dispenser(s) on the fuelling station forecourt. Our tried and tested designs are incorporated into a compact range of manifolds which offer significant improvements in terms of installation, footprint and minimisation of potential leak paths, compared with traditional panels using discrete components.
Features: 
Fully mechanical multifunction manifold block including, Direct Fill, Connections to compressor, storage and dispenser lines, Priority Valve, Check valves, Storage Gauges, Dispenser Line and Compressor Inlet Manual Ball Valves, ESD valves and a Low Bank Check Valve
Benefits: 
Accurate and Fully Automatic control of residual pressure in storage cascade banks, Consistent lift and reseat from the Priority valves makes for a more efficient priority fill system, proven reliability of all components in the manifold reduces maintenance, Easy change out of all components which are either cartridge valves and externally screwed into the manifold, easier and cheaper to install thanks to the through manifold mounting feature.

Specification

Process Connection(s): 
1/2" NPT
Outlet Pressure Range - bar: 
400
Outlet Pressure Range - psi: 
5800
Priority Valve Set pressure range bar: 
170 - 250bar
Priority Valve Set pressure range psi: 
2465 to 3600
Nominal bore - mm: 
12
Medium: 
Compressed Natural Gas
Standard Materials: 
Anodised aluminium, Nitrile , Viton & PEEK.
Ordering Information: 
Priority Valve Set pressures. Number of lines. Certification and QA requirements. What optional features are required.
Service instruction reference: 
PDF
Installation Dimensions
Height (mm): 
490
Depth (mm): 
145
Width (mm): 
244
Syndicate content